E.T.M.T 80 Mountain Cutting Machine

 

Electric Series Diamond Wire Cutting Machine

55 kW 80 hp power engine,1 frame and the back of the electrical panel, the frame at the front of the idler pulley and the main pulley, the main pulley. main pulley have a mudguard.The mudguard provide to minimize the dangers that may occur in the cutting of the wire service of the fender.

Machine movement is cable and remote controlled and the walking system is controlled by 2hp 1.5kw motor inverter. In this feature, it becomes faster and safer to cut. The 3 blocks of 2-meter rail under the block-cutting machine. Cutting process cutting of the diamond wire with the help of large and small marble pulley allows to cut the block marble.

In the serial block machine with electric diamond wire, water is sent to the cutting area with hoses while the cutting is in progress and controlled by valve. When cutting the mountain, it is ensured that the powder is kept at the minimum level and the powder is removed from the cutting zone.

Engine Type Electric
Motor Power  55 Kw 80 Hp
Engine Speed 1500 d/d (Rpm)
Motor Voltage 380 V
Walking System 1.5 Kw 2 Hp (invertor)
Operation (Control) Cable & Remote Control
Pulley Forward Motion 250 mm
Pulley Takeoff Movement Gearbox, Torque
Used Wire Diamond
Cutting Speed (Hours) 8 - 16 m Surface Clock
Capacity 100 - 150 m
Working Angel 360° Every Visit
Rail Pieces - Meter 3 Pieces, 2'şer Meters
Water Need (Hour) 500 Lt 
Pulley Diameter 80 cm 1 Piece
Direction Pulley Diameter 300 mm
Weight 1500 Kg
Length 2350 mm
Height 1400 mm
Width 900 mm
Trademark Karadeniz Mermer Makinaları
Commercial Model E.T.M.T 80