Mountain Cutting Machine
E.T.M.T 80 Mountain Cutting Machine
Electric Series Diamond Wire Cutting Machine
55 kW 80 hp power engine,1 frame and the back of the electrical panel, the frame at the front of the idler pulley and the main pulley, the main pulley. main pulley have a mudguard.The mudguard provide to minimize the dangers that may occur in the cutting of the wire service of the fender.
Machine movement is cable and remote controlled and the walking system is controlled by 2hp 1.5kw motor inverter. In this feature, it becomes faster and safer to cut. The 3 blocks of 2-meter rail under the block-cutting machine. Cutting process cutting of the diamond wire with the help of large and small marble pulley allows to cut the block marble.
In the serial block machine with electric diamond wire, water is sent to the cutting area with hoses while the cutting is in progress and controlled by valve. When cutting the mountain, it is ensured that the powder is kept at the minimum level and the powder is removed from the cutting zone.
| Engine Type | Electric |
| Motor Power | 55 Kw 80 Hp |
| Engine Speed | 1500 d/d (Rpm) |
| Motor Voltage | 380 V |
| Walking System | 1.5 Kw 2 Hp (invertor) |
| Operation (Control) | Cable & Remote Control |
| Pulley Forward Motion | 250 mm |
| Pulley Takeoff Movement | Gearbox, Torque |
| Used Wire | Diamond |
| Cutting Speed (Hours) | 8 - 16 m Surface Clock |
| Capacity | 100 - 150 m |
| Working Angel | 360° Every Visit |
| Rail Pieces - Meter | 3 Pieces, 2'şer Meters |
| Water Need (Hour) | 500 Lt |
| Pulley Diameter | 80 cm 1 Piece |
| Direction Pulley Diameter | 300 mm |
| Weight | 1500 Kg |
| Length | 2350 mm |
| Height | 1400 mm |
| Width | 900 mm |
| Trademark | Karadeniz Mermer Makinaları |
| Commercial Model | E.T.M.T 80 |